This page shows how to change the LAN IP Address on the TP-Link TD-VG3631 router.
Other TP-Link TD-VG3631 Guides
This is the ip address guide for the TP-Link TD-VG3631. We also have the following guides for the same router:
- TP-Link TD-VG3631 - Setup WiFi on the TP-Link TD-VG3631
- TP-Link TD-VG3631 - TP-Link TD-VG3631 Login Instructions
- TP-Link TD-VG3631 - TP-Link TD-VG3631 User Manual
- TP-Link TD-VG3631 - How to change the DNS settings on a TP-Link TD-VG3631 router
- TP-Link TD-VG3631 - TP-Link TD-VG3631 Screenshots
- TP-Link TD-VG3631 - Information About the TP-Link TD-VG3631 Router
- TP-Link TD-VG3631 - Reset the TP-Link TD-VG3631
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The TP-Link TD-VG3631
To get started configuring the TP-Link TD-VG3631 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the TP-Link TD-VG3631, follow our TP-Link TD-VG3631 Login Guide.
Change the LAN IP Address on a TP-Link TD-VG3631
If you followed our login guide above then you should see this screen.
This guide starts on the Basic Status page of the TP-Link TD-VG3631 router. To change the router's IP Address, click the option of Network in the left sidebar. Then below that find and select the link titled LAN Settings.
Configure the LAN section of your TP-Link TD-VG3631
Now on the correct page, find the box labeled IP Address. Enter the new IP Address you want to use for your router here. We recommend ending this address in a one such as 192.168.0.1 or 10.0.0.1
Don't make any other changes on this page.
Click the Save button when you are finished.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other TP-Link TD-VG3631 Info
Don't forget about our other TP-Link TD-VG3631 info that you might be interested in.
This is the ip address guide for the TP-Link TD-VG3631. We also have the following guides for the same router:
- TP-Link TD-VG3631 - Setup WiFi on the TP-Link TD-VG3631
- TP-Link TD-VG3631 - TP-Link TD-VG3631 Login Instructions
- TP-Link TD-VG3631 - TP-Link TD-VG3631 User Manual
- TP-Link TD-VG3631 - How to change the DNS settings on a TP-Link TD-VG3631 router
- TP-Link TD-VG3631 - TP-Link TD-VG3631 Screenshots
- TP-Link TD-VG3631 - Information About the TP-Link TD-VG3631 Router
- TP-Link TD-VG3631 - Reset the TP-Link TD-VG3631