Setup Router logo in white Setup router name logo in white
Get Software

Setup WiFi on the TP-Link TD-W8910G

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

The TP-Link TD-W8910G router is considered a wireless router because it offers WiFi connectivity. WiFi, or simply wireless, allows you to connect various devices to your router, such as wireless printers, smart televisions, and WiFi enabled smartphones.

Other TP-Link TD-W8910G Guides

This is the wifi guide for the TP-Link TD-W8910G. We also have the following guides for the same router:

WiFi Terms

Before we get started there is a little bit of background info that you should be familiar with.

Wireless Name

Your wireless network needs to have a name to uniquely identify it from other wireless networks. If you are not sure what this means we have a guide explaining what a wireless name is that you can read for more information.

Wireless Password

An important part of securing your wireless network is choosing a strong password.

Wireless Channel

Picking a WiFi channel is not always a simple task. Be sure to read about WiFi channels before making the choice.

Encryption

You should almost definitely pick WPA2 for your networks encryption. If you are unsure, be sure to read our WEP vs WPA guide first.

Login To The TP-Link TD-W8910G

To get started configuring the TP-Link TD-W8910G WiFi settings you need to login to your router. If you are already logged in you can skip this step.

To login to the TP-Link TD-W8910G, follow our TP-Link TD-W8910G Login Guide.

Find the WiFi Settings on the TP-Link TD-W8910G

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your TP-Link TD-W8910G router.

This wireless setup guide begins on the Device Info page of the TP-Link TD-W8910G router.

Start off by clicking Wireless on the left hand side of the page. Beneath that, make sure the option labeled Basic is selected.

Change the WiFi Settings on the TP-Link TD-W8910G

wifi wireless
This is the wifi setup page from your TP-Link TD-W8910G router.

Here you will enter your desired network name into the box labeled SSID. Your network name can be anything you like, but it would be best to avoid any personal information. To learn more, click this link.

Before leaving this page, make sure to click Save/Apply.

Now click the tab marked as Security on the left hand side of the page.

router wifi security wireless
This is the wifi security page from your TP-Link TD-W8910G router.

Now you should be on the page you see above.

Start out by opening the drop down menu labeled Network Authentication and selecting WPA-PSK. To learn more about wireless security, check out our guide.

Now you need to set your password. In the box marked WPA Pre-Shared Key, enter your desired password. For helpful tips on how to create a strong password, check out our Choosing a Strong Password Guide.

Open the drop down list labeled WPA Encryption and choose AES.

When you're finished, make sure to click Save/Apply.

Congratulations! You're finished.

Possible Problems when Changing your WiFi Settings

After making these changes to your router you will almost definitely have to reconnect any previously connected devices. This is usually done at the device itself and not at your computer.

Other TP-Link TD-W8910G Info

Don't forget about our other TP-Link TD-W8910G info that you might be interested in.

This is the wifi guide for the TP-Link TD-W8910G. We also have the following guides for the same router: