In this article, you will learn how to reset your TP-Link TD-W8960N v6 back to factory settings. This is not the same thing as rebooting a router. Unplugging a router from the wall reboots it. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Before you continue, there are a few things you need to know. The following settings in your router will be changed:
- The router's login and password are reset.
- All WiFi settings are reset, including network name and password.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other TP-Link TD-W8960N v6 Guides
This is the reset router guide for the TP-Link TD-W8960N v6 1.1.1. We also have the following guides for the same router:
Recover Password in TP-Link TD-W8960N v6
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the TP-Link TD-W8960N v6
You can usually find a small reset button on either the back or the bottom of a router. This is what a typical reset button looks like:
Yours may look slightly different, but they are usually tiny. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. It is harmless to hold the reset button too long.
Remember, this will erase everything you have previously done to this TP-Link TD-W8960N v6 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the TP-Link TD-W8960N v6
Now you need to log in using the factory default username and password. Just follow our TD-W8960N v6 Login Guide to find all of the information that you need.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other TP-Link TD-W8960N v6 Guides
We have collected a lot of information about the TP-Link TD-W8960N v6 router. You can find some of our additional content here.
This is the reset router guide for the TP-Link TD-W8960N v6 1.1.1. We also have the following guides for the same router: