In this article, you will learn how to reset your TP-Link TL-MR3020 back to factory settings. This is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. A Router Reset completely erases the router and returns it to factory settings.
Warning: Make sure that you fully understand the following before resetting your router. When you reset your router, the following will happen.
- The router's login and password are reset to factory defaults.
- Your WiFi login, password, and network name are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.
Other TP-Link TL-MR3020 Guides
This is the reset router guide for the TP-Link TL-MR3020. We also have the following guides for the same router:
Recover Password in TP-Link TL-MR3020
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the TP-Link TL-MR3020
Most of the time you can find a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:
Your reset button may look different, but usually they are very small. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Just don't forget that this will totally reset your TP-Link TL-MR3020 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the TP-Link TL-MR3020
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Our TL-MR3020 Login Guide has all of the information that you need.
Change Your Password
Be sure to change your router's default password after you get logged back in. Leaving a router password set to default is a very serious security risk. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other TP-Link TL-MR3020 Guides
Here are some of our other TP-Link TL-MR3020 guides that you might be interested in.
This is the reset router guide for the TP-Link TL-MR3020. We also have the following guides for the same router: