How to change the IP Address on a TP-Link TL-R600VPN router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the TP-Link TL-R600VPN router.

Other TP-Link TL-R600VPN Guides

This is the ip address guide for the TP-Link TL-R600VPN.We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The TP-Link TL-R600VPN

To get started configuring the TP-Link TL-R600VPN LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the TP-Link TL-R600VPN, follow our TP-Link TL-R600VPN Login Guide.

Change the LAN IP Address on a TP-Link TL-R600VPN

If you followed our login guide above then you should see this screen.

router setup
This is the setup page from your TP-Link router.

Once you've logged into the TP-Link TL-R600VPN router you'll be taken to the Home page. Want to change your IP address? You've come to the right place. Start off by clicking Network in the left hand sidebar. Then click LAN below that.

Configure the LAN section of your TP-Link TL-R600VPN

router IP address lan home network
This is the lan page from your TP-Link router.

You should be taken to the page you see above.

This page allows you to change your IP Address. Not quite sure what you should change it to? One good choice to try is 10.0.0.1

Beneath that is the Subnet Mask. However it's important that this stay at 255.255.255.0

That's it! You're finished. Just be sure to click Save before closing the page.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other TP-Link TL-R600VPN Info

Don't forget about our other TP-Link TL-R600VPN info that you might be interested in.

This is the ip address guide for the TP-Link TL-R600VPN.We also have the following guides for the same router: