If you need to reset your TP-Link TL-WR841N v13 router back to factory settings, then this article shows you how. This is not the same thing as rebooting a router. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Make sure that you fully understand the following before resetting your router. The following settings in your router will be changed:
- The router's login credentials are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
Resetting your router should be considered the last step. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other TP-Link TL-WR841N v13 Guides
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the reset router guide for the TP-Link TL-WR841N v13 0.9.1 3.16 v0001.0. We also have the following guides for the same router:
- TP-Link TL-WR841N v13 0.9.1 3.16 v0001.0 - Login to the TP-Link TL-WR841N v13
- TP-Link TL-WR841N v13 0.9.1 3.16 v0001.0 - Information About the TP-Link TL-WR841N v13 Router
Recover Password in TP-Link TL-WR841N v13
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the TP-Link TL-WR841N v13
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
On most routers you can find a small button on the back or the bottom labeled reset. A typical reset button looks like this:
Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Just don't forget that this will totally reset your TP-Link TL-WR841N v13 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the TP-Link TL-WR841N v13
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Our TL-WR841N v13 Login Guide has all of the information that you need.
Change Your Password
After logging in, you should really change your router's password for added security. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other TP-Link TL-WR841N v13 Guides
If you want additional help with your TP-Link TL-WR841N v13 be sure to check out some of our other guides.
This is the reset router guide for the TP-Link TL-WR841N v13 0.9.1 3.16 v0001.0. We also have the following guides for the same router:
- TP-Link TL-WR841N v13 0.9.1 3.16 v0001.0 - Login to the TP-Link TL-WR841N v13
- TP-Link TL-WR841N v13 0.9.1 3.16 v0001.0 - Information About the TP-Link TL-WR841N v13 Router