How to change the IP Address on a Trendnet TEW-639GR router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Trendnet TEW-639GR router.

Other Trendnet TEW-639GR Guides

This is the ip address guide for the Trendnet TEW-639GR. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Trendnet TEW-639GR

To get started configuring the Trendnet TEW-639GR LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Trendnet TEW-639GR, follow our Trendnet TEW-639GR Login Guide.

Change the LAN IP Address on a Trendnet TEW-639GR

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Trendnet TEW-639GR router.

Now that you have logged into the TRENDnet TEW-639GR you are going to be put on the Device Status page of your Router. First click the box on the left labeled Network, then LAN Setting.

Configure the LAN section of your Trendnet TEW-639GR

router setup
This is the setup page from your Trendnet TEW-639GR router.

You are now on the correct page to change your IP Address, the address you see when inside your network. Place your cursor in the box labeled IP Address and type in your new address you have chosen for your Router. We highly recommend using the address of 192.168.0.1

Leave the Subnet Mask at 255.255.255.0, this is the access point that your network sees. The DHCP Server should also be left alone.

When you are done, click the Apply button.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Trendnet TEW-639GR Info

Don't forget about our other Trendnet TEW-639GR info that you might be interested in.

This is the ip address guide for the Trendnet TEW-639GR. We also have the following guides for the same router: