Reset the Trendnet TV-IP100v3

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Trendnet TV-IP100v3 router to factory default settings. Resetting a router is different than rebooting a router. Every time your router loses power it reboots. This is different from a reset because a reset completely erases all settings from the router.

Warning: Make sure that you fully understand the following before resetting your router. The following settings will be changed in your router:

  • The router's login and password are reset to factory defaults.
  • All WiFi information such as network name, password, and authentication method are erased.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Trendnet TV-IP100v3 Guides

This is the reset router guide for the Trendnet TV-IP100v3. We also have the following guides for the same router:

Recover Password in Trendnet TV-IP100v3

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Trendnet TV-IP100v3

Usually there is a reset button located on the back or bottom of a router. Look at your router and try to find something that looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. You may need a paper clip to push the reset button.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not worry about holding the button down too long; this is harmless.

Keep in mind that this will completely reset your Trendnet TV-IP100v3 router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the Trendnet TV-IP100v3

After you are finished resetting your router, you need to login in using the original factory username and password. Just follow our TV-IP100v3 Login Guide to find all of the information that you need.

Change Your Password

After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Trendnet TV-IP100v3 Guides

We have collected a lot of information about the Trendnet TV-IP100v3 router. You can find some of our additional content here.

This is the reset router guide for the Trendnet TV-IP100v3. We also have the following guides for the same router: