If you need to reset your Ubee DDW 366 router back to factory settings, then this article shows you how. A router reset is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. This is different from a reset because a reset completely erases all settings from the router.
Warning: Make sure that you fully understand the following before resetting your router. The following settings in your router will be changed:
- The router's login credentials are reset.
- Your WiFi name and password are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Ubee DDW 366 Guides
This is the reset router guide for the Ubee DDW 366. We also have the following guides for the same router:
Recover Password in Ubee DDW 366
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Ubee DDW 366
Most routers have a small button on either the back or the bottom. Most reset buttons look like this:
Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. The lights on the front of the router should do something different when the reset happens. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Remember, this will totally reset your Ubee DDW 366 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Ubee DDW 366
Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a DDW 366 Login Guide with all this information ready for you.
Change Your Password
After logging in, you should really change your router's password for added security. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Ubee DDW 366 Guides
If you want additional help with your Ubee DDW 366 be sure to check out some of our other guides.
This is the reset router guide for the Ubee DDW 366. We also have the following guides for the same router: