This guide shows you how to reset your Ubee DVW 326 router to factory default settings. This is not the same thing as rebooting a router. Turning a router off and back on again causes a reboot. This is different from a reset because a reset completely erases all settings from the router.
Warning: This is not a step to be taken lightly. A router reset will affect the following settings:
- The router's login and password are reset.
- All WiFi login information and network names are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
Resetting your router should be considered the last step. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Ubee DVW 326 Guides
This is the reset router guide for the Ubee DVW 326. We also have the following guides for the same router:
Recover Password in Ubee DVW 326
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
A router reset should be the last thing you try if you are unable to login.
Reset the Ubee DVW 326
Most of the time you can find a small reset button located on either the back or the bottom of a router. Look for something that looks like this:
Yours may look slightly different, but they are usually tiny. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The lights on the front of the router should do something different when the reset happens. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Remember, this will totally reset your Ubee DVW 326 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Ubee DVW 326
After you are finished resetting your router, you need to login in using the original factory username and password. Our DVW 326 Login Guide has all of the information that you need.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. The factory default passwords for routers are very well known. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other Ubee DVW 326 Guides
We have collected a lot of information about the Ubee DVW 326 router. You can find some of our additional content here.
This is the reset router guide for the Ubee DVW 326. We also have the following guides for the same router: