How to change the IP Address on a Ubee DVW3201B router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Ubee DVW3201B router.

Other Ubee DVW3201B Guides

This is the ip address guide for the Ubee DVW3201B v9.We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Ubee DVW3201B

To get started configuring the Ubee DVW3201B LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Ubee DVW3201B, follow our Ubee DVW3201B Login Guide.

Change the LAN IP Address on a Ubee DVW3201B

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Ubee router.

When you want to change your IP Address, this is the address you are going to be looking at while inside the network, log into the Ubee DVW3201B. The first page you are placed on is the Information page. Second, choose the choice on the left side of the screen marked Setup.

Configure the LAN section of your Ubee DVW3201B

router IP address lan home network
This is the lan page from your Ubee router.

Once on this new page, place your cursor in the first of the four boxes labeled LAN IP Address and type in the new one you have chosen. Your new Router IP Address could be 192.168.1.1

After you have finished, click Apply.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Ubee DVW3201B Info

Don't forget about our other Ubee DVW3201B info that you might be interested in.

This is the ip address guide for the Ubee DVW3201B v9.We also have the following guides for the same router: