If you need to reset your Ubee EVW32C router back to factory settings, then this article shows you how. Resetting a router is different than rebooting a router. Rebooting a router is simply turning it off and back on again. A Router Reset completely erases the router and returns it to factory settings.
Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:
- The router's login credentials are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Ubee EVW32C Guides
This is the reset router guide for the Ubee EVW32C 2.2.1015-NCS. We also have the following guides for the same router:
Recover Password in Ubee EVW32C
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Ubee EVW32C
Most of the time you can find a small reset button located on either the back or the bottom of a router. Most reset buttons look like this:
Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. It is harmless to hold the reset button too long.
Remember, this will erase everything you have previously done to this Ubee EVW32C router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Ubee EVW32C
Once the reset is complete, you need to login to your router using the default IP address, username, and password. Our EVW32C Login Guide has all of the information that you need.
Change Your Password
Be sure to change your router's default password after you get logged back in. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Ubee EVW32C Guides
This isn't our only Ubee EVW32C guide. We also have the following guides for this router.
This is the reset router guide for the Ubee EVW32C 2.2.1015-NCS. We also have the following guides for the same router: