Setup Router logo in white Setup router name logo in white
Get Software

Reset the US Robotics USR9110

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This article covers how to reset the US Robotics USR9110 router back to factory default settings. A router reset is very different than a router reboot. Every time your router loses power it reboots. This is different from a reset because a reset completely erases all settings from the router.

Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:

  • The router's username and password are reset.
  • Your WiFi name and password are reset.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any port forwards, firewall settings, or parental controls that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other US Robotics USR9110 Guides

This is the reset router guide for the US Robotics USR9110. We also have the following guides for the same router:

Recover Password in US Robotics USR9110

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the US Robotics USR9110

There is usually a small reset button located on either the back or the bottom of a router. Look at your router and try to find something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. You may need a paper clip to push the reset button.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You can hold the button down as long as you like, it will not hurt anything.

Remember, this will erase everything you have previously done to this US Robotics USR9110 router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the US Robotics USR9110

Now you need to log in using the factory default username and password. You can follow the USR9110 Login Guide to find everything that you need to log in.

Change Your Password

You need to change your router's default password after you log in for the first time. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other US Robotics USR9110 Guides

We have collected a lot of information about the US Robotics USR9110 router. You can find some of our additional content here.

This is the reset router guide for the US Robotics USR9110. We also have the following guides for the same router: