How to change the IP Address on a Verizon T1114 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Verizon T1114 router.

Other Verizon T1114 Guides

This is the ip address guide for the Verizon T1114. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Verizon T1114

To get started configuring the Verizon T1114 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Verizon T1114, follow our Verizon T1114 Login Guide.

Change the LAN IP Address on a Verizon T1114

If you followed our login guide above then you should see this screen.

router setup
This is the setup page from your Verizon T1114 router.

After logging into the Verizon T1114 router you'll be taken to the Home page. To change your IP address click Settings on the left hand side of the page. From there click the tab marked Advanced and then LAN just below that.

Configure the LAN section of your Verizon T1114

router IP address lan home network
This is the lan page from your Verizon T1114 router.

You should now be on the page you see above.

This new page allows you to change your router's IP Address. Do this in the IPv4 section of the page. Enter your desired address into the provided box. Don't quite know what you should change it to? One good choice is 10.0.0.1

Just beneath that you'll see the Subnet Mask. However be sure not to change this. It needs to stay at 255.255.255.0

Congratulations! You're finished. Just don't forget to save your changes before closing the page.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Verizon T1114 Info

Don't forget about our other Verizon T1114 info that you might be interested in.

This is the ip address guide for the Verizon T1114. We also have the following guides for the same router: