In this article, you will learn how to reset your Wavlink WL-WN530H4 back to factory settings. This is a much bigger deal than a router reboot. A reboot happens every time a router loses power. However, when you reset a router you, return it back to its factory default settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. When you reset your router, the following will happen.
- The router's login credentials are reset to factory defaults.
- All WiFi settings are reset, including network name and password.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Wavlink WL-WN530H4 Guides
This is the reset router guide for the Wavlink WL-WN530H4 M30HG4.V5030.201217. We also have the following guides for the same router:
Recover Password in Wavlink WL-WN530H4
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Wavlink WL-WN530H4
On most routers you can find a small button on the back or the bottom labeled reset. Most reset buttons look like this:
Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. You can hold the button down as long as you like, it will not hurt anything.
Just don't forget that this will totally reset your Wavlink WL-WN530H4 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Wavlink WL-WN530H4
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can find all of the information that you need in our WL-WN530H4 Login Guide.
Change Your Password
After logging in, you should really change your router's password for added security. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Wavlink WL-WN530H4 Guides
Here are some of our other Wavlink WL-WN530H4 guides that you might be interested in.
This is the reset router guide for the Wavlink WL-WN530H4 M30HG4.V5030.201217. We also have the following guides for the same router: