Setup Router logo in white Setup router name logo in white
Get Software

Reset the Westell A90-750014-07

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This article covers how to reset the Westell A90-750014-07 router back to factory default settings. A router reset is very different than a router reboot. Every time your router loses power it reboots. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.

  • The router's login and password are reset to factory defaults.
  • Your WiFi name and password are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Westell A90-750014-07 Guides

This is the reset router guide for the Westell A90-750014-07. We also have the following guides for the same router:

Recover Password in Westell A90-750014-07

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Westell A90-750014-07

Usually there is a reset button located on the back or bottom of a router. Most reset buttons look like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Just don't forget that this will totally reset your Westell A90-750014-07 router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the Westell A90-750014-07

Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can follow the A90-750014-07 Login Guide to find everything that you need to log in.

Change Your Password

Be sure to change your router's default password after you get logged back in. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Westell A90-750014-07 Guides

If you want additional help with your Westell A90-750014-07 be sure to check out some of our other guides.

This is the reset router guide for the Westell A90-750014-07. We also have the following guides for the same router: