Reset the Zhone 6729-W1

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Zhone 6729-W1 router to factory default settings. Resetting a router is different than rebooting a router. A reboot happens every time a router loses power. A Router Reset completely erases the router and returns it to factory settings.

Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:

  • The router's username and password are reset.
  • All WiFi settings are reset, including network name and password.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Zhone 6729-W1 Guides

This is the reset router guide for the Zhone 6729-W1. We also have the following guides for the same router:

Recover Password in Zhone 6729-W1

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Zhone 6729-W1

There is usually a small reset button located on either the back or the bottom of a router. Look at your router and try to find something that looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. The lights on the front of the router should do something different when the reset happens. You can hold the button down as long as you like, it will not hurt anything.

Remember, this will erase everything you have previously done to this Zhone 6729-W1 router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the Zhone 6729-W1

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can find all of the information that you need in our 6729-W1 Login Guide.

Change Your Password

Be sure to change your router's default password after you get logged back in. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Zhone 6729-W1 Guides

We have collected a lot of information about the Zhone 6729-W1 router. You can find some of our additional content here.

This is the reset router guide for the Zhone 6729-W1. We also have the following guides for the same router: