How to change the IP Address on a Zoom X5 5654A router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Zoom X5 5654A router.

Other Zoom X5 5654A Guides

This is the ip address guide for the Zoom X5 5654A. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Zoom X5 5654A

To get started configuring the Zoom X5 5654A LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Zoom X5 5654A, follow our Zoom X5 5654A Login Guide.

Change the LAN IP Address on a Zoom X5 5654A

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Zoom X5 5654A router.

After logging into the Zoom X5 5654A you begin on the System Status page of your Router. To change your IP Address, or the address you see when inside your network, click the choice at the top labeled Advanced Setup.

Configure the LAN section of your Zoom X5 5654A

router setup
This is the setup page from your Zoom X5 5654A router.

This takes you to the LAN Configuration page. If you are not on this page, you may need to find and click the button labeled LAN, it is in the middle section of the screen. Scroll down this page until you come to the boxes labeled Conf. LAN IP Address. This is where you type in your new address you have chosen for your Router. One good suggestion is the address of 192.168.1.1 Make sure that you do not change the Conf. LAN Network Mask, this should remain at 255.255.255.0

For these changes to remain permanent you must click the button on the bottom of the screen labeled Write Settings to Flash.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Zoom X5 5654A Info

Don't forget about our other Zoom X5 5654A info that you might be interested in.

This is the ip address guide for the Zoom X5 5654A. We also have the following guides for the same router: