This is the reset guide for the ZTE AC30 router. A router reset is very different than a router reboot. Turning a router off and back on again causes a reboot. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Make sure that you fully understand the following before resetting your router. The following settings will be changed in your router:
- The router's username and password are reset to factory defaults.
- Your WiFi login, password, and network name are reset.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other ZTE AC30 Guides
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the reset router guide for the ZTE AC30. We also have the following guides for the same router:
Recover Password in ZTE AC30
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the ZTE AC30
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
You can usually find a small reset button on either the back or the bottom of a router. Most reset buttons look like this:
Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Don't forget, this step will totally reset your ZTE AC30 router back to factory settings.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the ZTE AC30
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. We have a AC30 Login Guide with all this information ready for you.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other ZTE AC30 Guides
This isn't our only ZTE AC30 guide. We also have the following guides for this router.
This is the reset router guide for the ZTE AC30. We also have the following guides for the same router: