This guide shows you how to reset your ZTE Bavo ZXV10-W300 router. A router reset is a much bigger deal than a router reboot. A reboot happens every time a router loses power. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:
- The router's login credentials are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other ZTE Bavo ZXV10-W300 Guides
This is the reset router guide for the ZTE Bavo ZXV10-W300. We also have the following guides for the same router:
Recover Password in ZTE Bavo ZXV10-W300
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the ZTE Bavo ZXV10-W300
Most of the time you can find a small reset button located on either the back or the bottom of a router. A typical reset button looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. You may need a paper clip to push the reset button.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Remember, this will erase everything you have previously done to this ZTE Bavo ZXV10-W300 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the ZTE Bavo ZXV10-W300
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. We have a Bavo ZXV10-W300 Login Guide with all this information ready for you.
Change Your Password
Do not forget to change your router's default password when you log back into it. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other ZTE Bavo ZXV10-W300 Guides
We have collected a lot of information about the ZTE Bavo ZXV10-W300 router. You can find some of our additional content here.
This is the reset router guide for the ZTE Bavo ZXV10-W300. We also have the following guides for the same router: