This page shows how to change the LAN IP Address on the ZTE MF29A router.
Other ZTE MF29A Guides
This is the ip address guide for the ZTE MF29A. We also have the following guides for the same router:
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The ZTE MF29A
To get started configuring the ZTE MF29A LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the ZTE MF29A, follow our ZTE MF29A Login Guide.
Change the LAN IP Address on a ZTE MF29A
If you followed our login guide above then you should see this screen.
This guide begins on the Home page of the ZTE MF29A router. To change your IP address click Settings in the left hand sidebar. Click Advanced below that and finally the Router tab near the middle of the page.
Configure the LAN section of your ZTE MF29A
This brings you to the page you see above.
Here you can change your router's IP Address. Enter your desired address into the given box. Not entirely sure what you should change it to? One good choice is 10.0.0.1
Beneath that is the Subnet Mask. This needs to be set to 255.255.255.0
That's it! You're finished. Just don't forget to click Apply before closing the page.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other ZTE MF29A Info
Don't forget about our other ZTE MF29A info that you might be interested in.
This is the ip address guide for the ZTE MF29A. We also have the following guides for the same router: