This article covers how to reset the ZTE MF612 router back to factory default settings. This is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. However, when you reset a router you, return it back to its factory default settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. A router reset will affect the following settings:
- The router's login and password are reset.
- Your WiFi login, password, and network name are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other ZTE MF612 Guides
This is the reset router guide for the ZTE MF612. We also have the following guides for the same router:
Recover Password in ZTE MF612
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the ZTE MF612
On most routers you can find a small button on the back or the bottom labeled reset. What you are looking for is something that looks like this:
Even though yours may look slightly different, you need to look for a tiny button. You may need a paper clip to push the reset button.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Don't forget, this step will totally reset your ZTE MF612 router back to factory settings.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the ZTE MF612
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. We have a MF612 Login Guide with all this information ready for you.
Change Your Password
After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other ZTE MF612 Guides
If you want additional help with your ZTE MF612 be sure to check out some of our other guides.
This is the reset router guide for the ZTE MF612. We also have the following guides for the same router: