This page shows how to change the LAN IP Address on the ZTE MF90 router.
Other ZTE MF90 Guides
This is the ip address guide for the ZTE MF90. We also have the following guides for the same router:
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The ZTE MF90
To get started configuring the ZTE MF90 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the ZTE MF90, follow our ZTE MF90 Login Guide.
Change the LAN IP Address on a ZTE MF90
If you followed our login guide above then you should see this screen.
Once you've logged into the ZTE MF90 router you should be taken to the Home page. To change your IP address click the Settings tab near the top of the page. From there click Router Settings located in the left hand sidebar.
Configure the LAN section of your ZTE MF90
You should now see the page presented above.
On this new page you're given the option to change your router's IP Address. Not quite sure what you should change it to? One good choice is 10.0.0.1
Next is the Subnet Mask. However this doesn't need to be changed. It's important that this stay at 255.255.255.0
That's it! You're done. Just be sure to click Apply before leaving.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other ZTE MF90 Info
Don't forget about our other ZTE MF90 info that you might be interested in.
This is the ip address guide for the ZTE MF90. We also have the following guides for the same router: