This article covers how to reset the ZTE MF975S Sprint router back to factory default settings. A router reset is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. However, when you reset a router you, return it back to its factory default settings.
Warning: Make sure that you fully understand the following before resetting your router. A router reset will affect the following settings:
- The router's login and password are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other ZTE MF975S Sprint Guides
This is the reset router guide for the ZTE MF975S Sprint. We also have the following guides for the same router:
Recover Password in ZTE MF975S Sprint
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
A router reset should be the last thing you try if you are unable to login.
Reset the ZTE MF975S Sprint
Usually there is a reset button located on the back or bottom of a router. This is what a typical reset button looks like:
Your reset button may look different, but usually they are very small. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Don't forget, this step will totally reset your ZTE MF975S Sprint router back to factory settings.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the ZTE MF975S Sprint
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can follow the MF975S Sprint Login Guide to find everything that you need to log in.
Change Your Password
After logging in, you should really change your router's password for added security. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other ZTE MF975S Sprint Guides
If you want additional help with your ZTE MF975S Sprint be sure to check out some of our other guides.
This is the reset router guide for the ZTE MF975S Sprint. We also have the following guides for the same router: