If you need to reset your ZTE ZXHN H108L router back to factory settings, then this article shows you how. Resetting a router is different than rebooting a router. Unplugging a router from the wall reboots it. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Proceed with caution; resetting your router can be a major headache. When you reset your router, the following will happen.
- The router's username and password are reset to factory defaults.
- Your WiFi name and password are reset.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other ZTE ZXHN H108L Guides
This is the reset router guide for the ZTE ZXHN H108L. We also have the following guides for the same router:
- ZTE ZXHN H108L - How to change the IP Address on a ZTE ZXHN H108L router
- ZTE ZXHN H108L - ZTE ZXHN H108L Login Instructions
- ZTE ZXHN H108L - ZTE ZXHN H108L User Manual
- ZTE ZXHN H108L - Setup WiFi on the ZTE ZXHN H108L
- ZTE ZXHN H108L - ZTE ZXHN H108L Screenshots
- ZTE ZXHN H108L - Information About the ZTE ZXHN H108L Router
Recover Password in ZTE ZXHN H108L
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the ZTE ZXHN H108L
You can usually find a small reset button on either the back or the bottom of a router. A typical reset button looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not worry about holding the button down too long; this is harmless.
Don't forget, this step will totally reset your ZTE ZXHN H108L router back to factory settings.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the ZTE ZXHN H108L
Once the reset is complete, you need to login to your router using the default IP address, username, and password. Just follow our ZXHN H108L Login Guide to find all of the information that you need.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other ZTE ZXHN H108L Guides
Here are some of our other ZTE ZXHN H108L guides that you might be interested in.
This is the reset router guide for the ZTE ZXHN H108L. We also have the following guides for the same router:
- ZTE ZXHN H108L - How to change the IP Address on a ZTE ZXHN H108L router
- ZTE ZXHN H108L - ZTE ZXHN H108L Login Instructions
- ZTE ZXHN H108L - ZTE ZXHN H108L User Manual
- ZTE ZXHN H108L - Setup WiFi on the ZTE ZXHN H108L
- ZTE ZXHN H108L - ZTE ZXHN H108L Screenshots
- ZTE ZXHN H108L - Information About the ZTE ZXHN H108L Router