Setup Router logo in white Setup router name logo in white
Get Software

Reset the ZTE ZXHN H108N

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This guide shows you how to reset your ZTE ZXHN H108N router. This is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. This is different from a reset because a reset completely erases all settings from the router.

Warning: Proceed with caution; resetting your router can be a major headache. The following settings in your router will be changed:

  • The router's login credentials are reset.
  • Your WiFi name and password are reset.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

A router reset is the last step you should take in recovering your router's password. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other ZTE ZXHN H108N Guides

This is the reset router guide for the ZTE ZXHN H108N v25 Nova. We also have the following guides for the same router:

Recover Password in ZTE ZXHN H108N

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the ZTE ZXHN H108N

Usually there is a reset button located on the back or bottom of a router. Look for something that looks like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Remember, this will totally reset your ZTE ZXHN H108N router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the ZTE ZXHN H108N

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Just follow our ZXHN H108N Login Guide to find all of the information that you need.

Change Your Password

Be sure to change your router's default password after you get logged back in. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other ZTE ZXHN H108N Guides

We have collected a lot of information about the ZTE ZXHN H108N router. You can find some of our additional content here.

This is the reset router guide for the ZTE ZXHN H108N v25 Nova. We also have the following guides for the same router: