In this article, you will learn how to reset your ZTE ZXHN H267A v1.0 back to factory settings. A router reset is very different than a router reboot. Turning a router off and back on again causes a reboot. This is different from a reset because a reset completely erases all settings from the router.
Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:
- The router's login and password are reset to factory defaults.
- Your WiFi name and password are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other ZTE ZXHN H267A v1.0 Guides
This is the reset router guide for the ZTE ZXHN H267A v1.0 v1.0.1_TRT24. We also have the following guides for the same router:
Recover Password in ZTE ZXHN H267A v1.0
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the ZTE ZXHN H267A v1.0
Usually there is a reset button located on the back or bottom of a router. This is what a typical reset button looks like:
Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. You can hold the button down as long as you like, it will not hurt anything.
Keep in mind that this will completely reset your ZTE ZXHN H267A v1.0 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the ZTE ZXHN H267A v1.0
Now you need to log in using the factory default username and password. You can follow the ZXHN H267A v1.0 Login Guide to find everything that you need to log in.
Change Your Password
Be sure to change your router's default password after you get logged back in. Leaving a router password set to default is a very serious security risk. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other ZTE ZXHN H267A v1.0 Guides
Here are some of our other ZTE ZXHN H267A v1.0 guides that you might be interested in.
This is the reset router guide for the ZTE ZXHN H267A v1.0 v1.0.1_TRT24. We also have the following guides for the same router: