Setup Router logo in white Setup router name logo in white
Get Software

Reset the ZTE ZXHN H267A

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 5 minutes

This article covers how to reset the ZTE ZXHN H267A router back to factory default settings. Resetting a router is different than rebooting a router. A reboot happens every time a router loses power. A Router Reset completely erases the router and returns it to factory settings.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. When you reset your router, the following will happen.

  • The router's login and password are reset.
  • Your WiFi name and password are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any parental controls, firewall settings, or port forwards will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other ZTE ZXHN H267A Guides

This is the reset router guide for the ZTE ZXHN H267A H267A_DSL_V2.0 AIS Fibre. We also have the following guides for the same router:

Recover Password in ZTE ZXHN H267A

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the ZTE ZXHN H267A

Most routers have a small button on either the back or the bottom. Look for something that looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. Sometimes the button is under a pinhole, and you need a paper clip to push it.

Hold the reset button down for 10 seconds and watch the lights. The blinking pattern of the lights on the front of the router should change when the reset is complete. It is harmless to hold the reset button too long.

Remember, this will erase everything you have previously done to this ZTE ZXHN H267A router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the ZTE ZXHN H267A

Now you need to log in using the factory default username and password. We have a ZXHN H267A Login Guide with all this information ready for you.

Change Your Password

You need to change your router's default password after you log in for the first time. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other ZTE ZXHN H267A Guides

If you want additional help with your ZTE ZXHN H267A be sure to check out some of our other guides.

This is the reset router guide for the ZTE ZXHN H267A H267A_DSL_V2.0 AIS Fibre. We also have the following guides for the same router: