Setup Router logo in white Setup router name logo in white
Get Software

Reset the ZTE ZXHN H267A

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 5 minutes

This guide shows you how to reset your ZTE ZXHN H267A router to factory default settings. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. This is different from a reset because a reset completely erases all settings from the router.

Warning: Make sure that you fully understand the following before resetting your router. The following settings in your router will be changed:

  • The router's login and password are reset to factory defaults.
  • Your WiFi name and password are reset.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • All parental controls, firewall settings, and port forwards will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other ZTE ZXHN H267A Guides

This is the reset router guide for the ZTE ZXHN H267A v1.0.5_CZ.2T15 (CZ) O2. We also have the following guides for the same router:

Recover Password in ZTE ZXHN H267A

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the ZTE ZXHN H267A

Most routers have a small button on either the back or the bottom. What you are looking for is something that looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. You may need a paper clip to push the reset button.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You can hold the button down as long as you like, it will not hurt anything.

Remember, this will erase everything you have previously done to this ZTE ZXHN H267A router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the ZTE ZXHN H267A

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Our ZXHN H267A Login Guide has all of the information that you need.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. It's a very bad idea to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other ZTE ZXHN H267A Guides

This isn't our only ZTE ZXHN H267A guide. We also have the following guides for this router.

This is the reset router guide for the ZTE ZXHN H267A v1.0.5_CZ.2T15 (CZ) O2. We also have the following guides for the same router: