How to change the IP Address on a ZyXEL AMG1302-T10B router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the ZyXEL AMG1302-T10B router.

Other ZyXEL AMG1302-T10B Guides

This is the ip address guide for the ZyXEL AMG1302-T10B. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The ZyXEL AMG1302-T10B

To get started configuring the ZyXEL AMG1302-T10B LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the ZyXEL AMG1302-T10B, follow our ZyXEL AMG1302-T10B Login Guide.

Change the LAN IP Address on a ZyXEL AMG1302-T10B

If you followed our login guide above then you should see this screen.

router attached devices
This is the attached devices page from your ZyXEL AMG1302-T10B router.

After logging into the ZyXEL AMG1302-T10B router you should be taken to the Home page. Want to change your IP address but not sure how to start? Not to fear: we'll show you how.

Start out by clicking Network Setting at the bottom of the page. From there click the LAN Setup tab near the top of the page.

Configure the LAN section of your ZyXEL AMG1302-T10B

router IP address lan home network
This is the lan page from your ZyXEL AMG1302-T10B router.

This brings you to the page you see above.

Now you can change your router's IP Address. Enter your desired address into the provided box. Not quite sure what a good choice is? Try 10.0.0.1

Just beneath that you'll see the Subnet Mask. Be sure not to change this. It needs to stay at 255.255.255.0

Congratulations! You're done. Just be sure to click Apply before leaving the page.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other ZyXEL AMG1302-T10B Info

Don't forget about our other ZyXEL AMG1302-T10B info that you might be interested in.

This is the ip address guide for the ZyXEL AMG1302-T10B. We also have the following guides for the same router: