In this article, you will learn how to reset your ZyXEL DX3301-T0 back to factory settings. This is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. This is different from a reset because a reset completely erases all settings from the router.
Warning: Make sure that you fully understand the following before resetting your router. The following settings will be changed in your router:
- The router's username and password are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other ZyXEL DX3301-T0 Guides
This is the reset router guide for the ZyXEL DX3301-T0 v5.50(ACEF.0)b2 Windtre. We also have the following guides for the same router:
Recover Password in ZyXEL DX3301-T0
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the ZyXEL DX3301-T0
You can usually find a small reset button on either the back or the bottom of a router. Most reset buttons look like this:
Reset buttons are usually tiny. Yours may look slightly different than this. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Just don't forget that this will totally reset your ZyXEL DX3301-T0 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the ZyXEL DX3301-T0
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can follow the DX3301-T0 Login Guide to find everything that you need to log in.
Change Your Password
Be sure to change your router's default password after you get logged back in. The factory default passwords for routers are very well known. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other ZyXEL DX3301-T0 Guides
If you want additional help with your ZyXEL DX3301-T0 be sure to check out some of our other guides.
This is the reset router guide for the ZyXEL DX3301-T0 v5.50(ACEF.0)b2 Windtre. We also have the following guides for the same router: