This is the reset guide for the ZyXEL LTE3301-PLUS router. A router reset is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. When you reset your router, the following will happen.
- The router's login credentials are reset to factory defaults.
- All WiFi settings are reset, including network name and password.
- All ISP settings will reset to default, and you may have to contact your ISP.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.
Other ZyXEL LTE3301-PLUS Guides
This is the reset router guide for the ZyXEL LTE3301-PLUS 1.00(ABQU.2)C0. We also have the following guides for the same router:
Recover Password in ZyXEL LTE3301-PLUS
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
A router reset should be the last thing you try if you are unable to login.
Reset the ZyXEL LTE3301-PLUS
You can usually find a small reset button on either the back or the bottom of a router. What you are looking for is something that looks like this:
Even though yours may look slightly different, you need to look for a tiny button. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Remember, this will erase everything you have previously done to this ZyXEL LTE3301-PLUS router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the ZyXEL LTE3301-PLUS
Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a LTE3301-PLUS Login Guide with all this information ready for you.
Change Your Password
You need to change your router's default password after you log in for the first time. It is a huge security risk to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other ZyXEL LTE3301-PLUS Guides
We have collected a lot of information about the ZyXEL LTE3301-PLUS router. You can find some of our additional content here.
This is the reset router guide for the ZyXEL LTE3301-PLUS 1.00(ABQU.2)C0. We also have the following guides for the same router: