This guide shows you how to reset your ZyXEL NBG-416N router. A router reset is very different than a router reboot. Turning a router off and back on again causes a reboot. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: This is not a step to be taken lightly. When you reset your router, the following will happen.
- The router's login and password are reset.
- Your WiFi name and password are reset.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset is the last step you should take in recovering your router's password. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other ZyXEL NBG-416N Guides
This is the reset router guide for the ZyXEL NBG-416N. We also have the following guides for the same router:
- ZyXEL NBG-416N - How to change the IP Address on a ZyXEL NBG-416N router
- ZyXEL NBG-416N - ZyXEL NBG-416N User Manual
- ZyXEL NBG-416N - ZyXEL NBG-416N Login Instructions
- ZyXEL NBG-416N - How to change the DNS settings on a ZyXEL NBG-416N router
- ZyXEL NBG-416N - Setup WiFi on the ZyXEL NBG-416N
- ZyXEL NBG-416N - Information About the ZyXEL NBG-416N Router
- ZyXEL NBG-416N - ZyXEL NBG-416N Screenshots
Recover Password in ZyXEL NBG-416N
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the ZyXEL NBG-416N
Most routers have a small button on either the back or the bottom. Most reset buttons look like this:
Even though yours may look slightly different, you need to look for a tiny button. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Just don't forget that this will totally reset your ZyXEL NBG-416N router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the ZyXEL NBG-416N
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can follow the NBG-416N Login Guide to find everything that you need to log in.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other ZyXEL NBG-416N Guides
This isn't our only ZyXEL NBG-416N guide. We also have the following guides for this router.
This is the reset router guide for the ZyXEL NBG-416N. We also have the following guides for the same router:
- ZyXEL NBG-416N - How to change the IP Address on a ZyXEL NBG-416N router
- ZyXEL NBG-416N - ZyXEL NBG-416N User Manual
- ZyXEL NBG-416N - ZyXEL NBG-416N Login Instructions
- ZyXEL NBG-416N - How to change the DNS settings on a ZyXEL NBG-416N router
- ZyXEL NBG-416N - Setup WiFi on the ZyXEL NBG-416N
- ZyXEL NBG-416N - Information About the ZyXEL NBG-416N Router
- ZyXEL NBG-416N - ZyXEL NBG-416N Screenshots