This guide shows you how to reset your ZyXEL NBG-418N v2 router. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Make sure that you fully understand the following before resetting your router. The following settings in your router will be changed:
- The router's username and password are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other ZyXEL NBG-418N v2 Guides
This is the reset router guide for the ZyXEL NBG-418N v2 v1.00(AARP.9)C0. We also have the following guides for the same router:
Recover Password in ZyXEL NBG-418N v2
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the ZyXEL NBG-418N v2
You can usually find a small reset button on either the back or the bottom of a router. This is what a typical reset button looks like:
Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Hold the reset button down for 10 seconds and watch the lights. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Keep in mind that this will completely reset your ZyXEL NBG-418N v2 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the ZyXEL NBG-418N v2
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Our NBG-418N v2 Login Guide has all of the information that you need.
Change Your Password
Be sure to change your router's default password after you get logged back in. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other ZyXEL NBG-418N v2 Guides
If you want additional help with your ZyXEL NBG-418N v2 be sure to check out some of our other guides.
This is the reset router guide for the ZyXEL NBG-418N v2 v1.00(AARP.9)C0. We also have the following guides for the same router: