Setup Router logo in white Setup router name logo in white
Get Software

Reset the ZyXEL P-2602R-D1A

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

In this article, you will learn how to reset your ZyXEL P-2602R-D1A back to factory settings. Resetting a router is different than rebooting a router. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: This is not a step to be taken lightly. When you reset your router, the following will happen.

  • The router's username and password are reset to factory defaults.
  • All WiFi login information and network names are reset.
  • Your ISP username and password will be reset, and you may have to contact your ISP.
  • All port forwards, firewall settings, and parental controls that you have configured will be removed.

Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other ZyXEL P-2602R-D1A Guides

This is the reset router guide for the ZyXEL P-2602R-D1A. We also have the following guides for the same router:

Recover Password in ZyXEL P-2602R-D1A

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the ZyXEL P-2602R-D1A

Usually there is a reset button located on the back or bottom of a router. A typical reset button looks like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not worry about holding the button down too long; this is harmless.

Remember, this will totally reset your ZyXEL P-2602R-D1A router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the ZyXEL P-2602R-D1A

Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can find all of the information that you need in our P-2602R-D1A Login Guide.

Change Your Password

Do not forget to change your router's default password when you log back into it. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other ZyXEL P-2602R-D1A Guides

This isn't our only ZyXEL P-2602R-D1A guide. We also have the following guides for this router.

This is the reset router guide for the ZyXEL P-2602R-D1A. We also have the following guides for the same router: