This page shows how to change the LAN IP Address on the ZyXEL P 660R F1 router.
Other ZyXEL P 660R F1 Guides
This is the ip address guide for the ZyXEL P 660R F1. We also have the following guides for the same router:
- ZyXEL P 660R F1 - ZyXEL P 660R F1 User Manual
- ZyXEL P 660R F1 - ZyXEL P 660R F1 Login Instructions
- ZyXEL P 660R F1 - How to change the DNS settings on a ZyXEL P 660R F1 router
- ZyXEL P 660R F1 - ZyXEL P 660R F1 Screenshots
- ZyXEL P 660R F1 - Information About the ZyXEL P 660R F1 Router
- ZyXEL P 660R F1 - Reset the ZyXEL P 660R F1
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The ZyXEL P 660R F1
To get started configuring the ZyXEL P 660R F1 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the ZyXEL P 660R F1, follow our ZyXEL P 660R F1 Login Guide.
Change the LAN IP Address on a ZyXEL P 660R F1
If you followed our login guide above then you should see this screen.
Now that you have finished logging into the ZyXEL P-660R-F1 you begin on the Device Information page of this Router. When you want to change your Router's IP Address, the local address of your Router, click the choice on the left sidebar labeled Network, then LAN. When the new page comes up, choose the tab at the top labeled IP.
Configure the LAN section of your ZyXEL P 660R F1
On this new page, place your cursor in the first box labeled IP Address and enter the new address you have chosen for your ZyXEL P-660R-F1. We strongly recommend using an address that ends in a 1 for simplicity, such as 192.168.0.1
Don't change the IP Subnet Mask, this needs to remain at 255.255.255.0
When you are finished, make sure and hit the Apply button before exiting.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other ZyXEL P 660R F1 Info
Don't forget about our other ZyXEL P 660R F1 info that you might be interested in.
This is the ip address guide for the ZyXEL P 660R F1. We also have the following guides for the same router:
- ZyXEL P 660R F1 - ZyXEL P 660R F1 User Manual
- ZyXEL P 660R F1 - ZyXEL P 660R F1 Login Instructions
- ZyXEL P 660R F1 - How to change the DNS settings on a ZyXEL P 660R F1 router
- ZyXEL P 660R F1 - ZyXEL P 660R F1 Screenshots
- ZyXEL P 660R F1 - Information About the ZyXEL P 660R F1 Router
- ZyXEL P 660R F1 - Reset the ZyXEL P 660R F1