This guide shows you how to reset your ZyXEL SBG3300 router to factory default settings. A router reset is very different than a router reboot. A reboot happens every time a router loses power. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Before you continue, there are a few things you need to know. The following settings will be changed in your router:
- The router's username and password are reset.
- All WiFi login information and network names are reset.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other ZyXEL SBG3300 Guides
This is the reset router guide for the ZyXEL SBG3300 v1.01(AAZZ.0)_01150616R1. We also have the following guides for the same router:
Recover Password in ZyXEL SBG3300
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the ZyXEL SBG3300
Most routers have a small button on either the back or the bottom. Look at your router and try to find something that looks like this:
Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The blinking pattern of the lights on the front of the router should change when the reset is complete. It is harmless to hold the reset button too long.
Don't forget, this step will totally reset your ZyXEL SBG3300 router back to factory settings.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the ZyXEL SBG3300
Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a SBG3300 Login Guide with all this information ready for you.
Change Your Password
Do not forget to change your router's default password when you log back into it. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other ZyXEL SBG3300 Guides
This isn't our only ZyXEL SBG3300 guide. We also have the following guides for this router.
This is the reset router guide for the ZyXEL SBG3300 v1.01(AAZZ.0)_01150616R1. We also have the following guides for the same router: