This guide shows you how to reset your ZyXEL VMG3925-B10B router to factory default settings. Resetting a router is different than rebooting a router. Unplugging a router from the wall reboots it. This is different from a reset because a reset completely erases all settings from the router.
Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.
- The router's login credentials are reset to factory defaults.
- Your WiFi login, password, and network name are reset.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other ZyXEL VMG3925-B10B Guides
This is the reset router guide for the ZyXEL VMG3925-B10B. We also have the following guides for the same router:
Recover Password in ZyXEL VMG3925-B10B
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the ZyXEL VMG3925-B10B
Usually there is a reset button located on the back or bottom of a router. Most reset buttons look like this:
Even though yours may look slightly different, you need to look for a tiny button. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. It is harmless to hold the reset button too long.
Just don't forget that this will totally reset your ZyXEL VMG3925-B10B router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the ZyXEL VMG3925-B10B
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. We have a VMG3925-B10B Login Guide with all this information ready for you.
Change Your Password
After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other ZyXEL VMG3925-B10B Guides
Here are some of our other ZyXEL VMG3925-B10B guides that you might be interested in.
This is the reset router guide for the ZyXEL VMG3925-B10B. We also have the following guides for the same router: