Setup Router logo in white Setup router name logo in white
Get Software

Reset the ZyXEL VMG8924 B10A

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your ZyXEL VMG8924 B10A router to factory default settings. This is not the same thing as rebooting a router. Turning a router off and back on again causes a reboot. This is different from a reset because a reset completely erases all settings from the router.

Warning: Before you continue, there are a few things you need to know. The following settings in your router will be changed:

  • The router's login and password are reset to factory defaults.
  • All WiFi settings are reset, including network name and password.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.

Other ZyXEL VMG8924 B10A Guides

This is the reset router guide for the ZyXEL VMG8924 B10A. We also have the following guides for the same router:

Recover Password in ZyXEL VMG8924 B10A

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the ZyXEL VMG8924 B10A

Usually there is a reset button located on the back or bottom of a router. Most reset buttons look like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Remember, this will erase everything you have previously done to this ZyXEL VMG8924 B10A router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the ZyXEL VMG8924 B10A

Now you need to log in using the factory default username and password. You can follow the VMG8924 B10A Login Guide to find everything that you need to log in.

Change Your Password

You need to change your router's default password after you log in for the first time. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other ZyXEL VMG8924 B10A Guides

Here are some of our other ZyXEL VMG8924 B10A guides that you might be interested in.

This is the reset router guide for the ZyXEL VMG8924 B10A. We also have the following guides for the same router: