In this guide I will show you how to reset the Actiontec T1200H Telus router. This is not the same thing as a reboot. When you reboot a device you are simply turning it off and back on again. A reset is much more than that. A reset erases all previously configured settings and returns them to factory defaults.
Warning: Resetting a router is a big step. You need to fully reconfigure the device afterwards. Some of the settings that need to be changed after a reset are:
- The router's login username and password.
- The router's Wi-Fi SSID/network name and password.
- If this is a DSL router, you need to re-enter the ISP (Internet Service Provider) username and password. Call your ISP for these details.
- Any port forwarding, scheduling, or IP addresses you have changed.
Other Actiontec T1200H Telus Guides
This is the reset router guide for the Actiontec T1200H Telus. We also have the following guides for the same router:
- Actiontec T1200H Telus - Setup WiFi on the Actiontec T1200H Telus
- Actiontec T1200H Telus - Actiontec T1200H Telus User Manual
- Actiontec T1200H Telus - Actiontec T1200H Telus Login Instructions
- Actiontec T1200H Telus - Actiontec T1200H Telus Screenshots
- Actiontec T1200H Telus - Information About the Actiontec T1200H Telus Router
Reset the Actiontec T1200H Telus
Turn your router around so you are looking at the back panel. There should be a small recessed button like this:
While the router is on, take a straightened paperclip and press down on this reset button for more than 5 seconds. This begins the reset process which can take several minutes to complete.
Warning: Do not unplug or turn off the router during the reset process. Doing so can cause permanent damage to the device.
We strongly recommend exhausting all other troubleshooting methods before you decide to reset this router. All your personalized settings will be erased.
Login to the Actiontec T1200H Telus
After the reset is complete, you need to login to the Actiontec T1200H Telus using the default username and password.
Not sure what these are? Check out our Actiontec T1200H Telus Login Guide.
Change Your Password
After you have logged into the Actiontec T1200H Telus router you should change the default username and password for the router interface. If you need help coming up with yet another password check out our guide titled Choosing a Strong Password.
TIP: The main cause of needing to reset a router is loss of the router username and password. To avoid losing this username and password again, tape it to the bottom of the router for next time.
Setup WiFi on the Actiontec T1200H Telus
We recommend updating your router security as well. Some routers do not have any security by default. Please make sure your security is turned on. Follow our Actiontec T1200H Telus WiFi Instructions to create a strong security for your wireless connection.
Actiontec T1200H Telus Help
Be sure to check out our other Actiontec T1200H Telus info that you might be interested in.
This is the reset router guide for the Actiontec T1200H Telus. We also have the following guides for the same router:
- Actiontec T1200H Telus - Setup WiFi on the Actiontec T1200H Telus
- Actiontec T1200H Telus - Actiontec T1200H Telus User Manual
- Actiontec T1200H Telus - Actiontec T1200H Telus Login Instructions
- Actiontec T1200H Telus - Actiontec T1200H Telus Screenshots
- Actiontec T1200H Telus - Information About the Actiontec T1200H Telus Router