How to Reset the ADB P RG A4202N

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This guide will cover how to reset the ADB P-RG_A4202N router to factory defaults. This is not the same thing as rebooting the router which consists of cycling the power by turning it off and back on again. Resetting the router reverts all settings to how they were when you purchased the router.

Warning: Resetting the router may change more settings than you are aware of. Take the following into consideration:

  • The router username and password are reset to factory defaults.
  • The Internet username/SSID and password are reset as well.
  • If you use a DSL connection you will need to re-enter your ISP username and password before you can use the Internet again.
  • All configurations are erased. This includes any port forwards or IP address changes.

Other ADB P RG A4202N Guides

This is the reset router guide for the ADB P RG A4202N. We also have the following guides for the same router:

Reset the ADB P RG A4202N

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

While your ADB P-RG_A4202N router is on, turn it over so you are looking at the backside of it. Then locate the reset button. The image below shows it being on the back panel but in the manual it says the reset button is on the side of the device.

router reset factory settings
This is the reset page from your ADB P RG A4202N router.

Using a pin or paperclip press and hold the reset button for approximately 10 seconds. This begins the reset process. Do not unplug or turn off your router during this period as it could cause permanent damage to your router.

Remember this erases everything you have done to personalize this device. Only reset the router after you have exhausted other troubleshooting options.

Login to the ADB P RG A4202N

After you have reset the ADB P-RG_A4202N router you need to login using the default username and password. If you need help, check out this ADB P-RG_A4202N Login Guide.

Change Your Password

Once you have logged into the router you need to change your password. This can be anything you like. If you need help coming up with a strong password check out this Choosing a Strong Password guide for helpful tips.

Tip: Don't forget to write this new password down on a piece of paper and attach it to the bottom of the router for future reference.

Setup WiFi on the ADB P-RG_A4202N

The last setting we recommend you change right away is the WiFi security. There are some routers that leave the security open or disabled as default. This means that anyone and their friends can connect to your network with or without your permission. Change your WiFi security to WPA2-PSK for the strongest method of encryption. If you need help check out our How to Setup WiFi on the ADB P-RG_A4202N.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

ADB P RG A4202N Help

Be sure to check out our other ADB P RG A4202N info that you might be interested in.

This is the reset router guide for the ADB P RG A4202N. We also have the following guides for the same router: