Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Amped Wireless RTA15 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Amped Wireless RTA15 router.

Other Amped Wireless RTA15 Guides

This is the ip address guide for the Amped Wireless RTA15. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Amped Wireless RTA15

To get started configuring the Amped Wireless RTA15 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Amped Wireless RTA15, follow our Amped Wireless RTA15 Login Guide.

Change the LAN IP Address on a Amped Wireless RTA15

If you followed our login guide above then you should see this screen.

router setup
This is the setup page from your Amped Wireless RTA15 router.

This guide begins on the Welcome to the Dashboard page of the Amped Wireless RTA15 router. Click the option of More Settings in the left sidebar. Then below that pick the link titled Network Settingsand finally Local Network (LAN).

Configure the LAN section of your Amped Wireless RTA15

router IP address lan home network
This is the lan page from your Amped Wireless RTA15 router.

This should bring you to a page like the one you see above.

Find the box titled IP Address and enter the new LAN IP Address you have picked out. We recommend ending the IP Address with a 1 like the address of 192.168.1.1 or 10.0.0.1

Leave every other setting alone on this page, just click the APPLY button before you exit.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Amped Wireless RTA15 Info

Don't forget about our other Amped Wireless RTA15 info that you might be interested in.

This is the ip address guide for the Amped Wireless RTA15. We also have the following guides for the same router: