In this guide we will walk you through the steps involved in resetting a Arris NVG589 ATT router. This is not the same thing as a reboot. A reboot is simply a cycle in the power to the unit. To do this you can unplug the device for about 15 seconds, and plug it back in. A reset erases all changed settings and returns them to factory defaults.
Warning: Resetting a router is a big step. You need to fully reconfigure the device afterwards. Some of the settings that need to be changed after a reset are:
- The router's login username and password.
- The router's Wi-Fi SSID/network name and password.
- If this is a DSL router, you need to re-enter the ISP (Internet Service Provider) username and password. Call your ISP for these details.
- Any port forwarding, scheduling, or IP addresses you have changed.
We strongly recommend you exhaust other troubleshooting options before you decide to reset your Arris NVG589 ATT router.
Other Arris NVG589 ATT Guides
This is the reset router guide for the Arris NVG589 ATT. We also have the following guides for the same router:
Reset the Arris NVG589 ATT
Turn your router around so you are looking at the back panel. We have found the placement in the image below:
While the router is on, take a straightened paperclip and press down on the reset button for more than 10 seconds. This starts the reset process which can take several minutes to complete. If you do not hold the reset button down for a full 10 seconds you will simply reboot the device.
Warning: Do not unplug or turn off the router during the reset process. Doing so can cause permanent damage to the device.
Login to the Arris NVG589 ATT
After the reset is complete and router has turned back on, you need to login to the device using the default values.
Login Guide for the Arris NVG589 ATT
Change Your Password
It is always a good idea to change a default password. Defaults are typically very easy to guess. Use our password guide to help you if you need it.
Tip: To avoid losing the password in the future you can write it down on a sticky note and attach it to the router.
Setup WiFi on the Arris NVG589 ATT
Finally, you need to be sure the wireless security is set to your standards.
How to Setup WiFi on the Arris NVG589 ATT
Arris NVG589 ATT Help
Be sure to check out our other Arris NVG589 ATT info that you might be interested in.
This is the reset router guide for the Arris NVG589 ATT. We also have the following guides for the same router: