Setup Router logo in white Setup router name logo in white
Get Software

Reset the Arris TG4482A

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This guide shows you how to reset your Arris TG4482A router to factory default settings. A router reset is very different than a router reboot. Turning a router off and back on again causes a reboot. Resetting a router erases all settings from it and returns it to factory defaults.

Warning: Make sure that you fully understand the following before resetting your router. A router reset will affect the following settings:

  • The router's login credentials are reset.
  • All WiFi information such as network name, password, and authentication method are erased.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Arris TG4482A Guides

Use a VPN

Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN birthday deal!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the reset router guide for the Arris TG4482A TG4482PC2_5.8p10s3_PROD_sey Xfinity. We also have the following guides for the same router:

Recover Password in Arris TG4482A

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Recover Lost or Forgotten Router Passwords

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Arris TG4482A

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

You can usually find a small reset button on either the back or the bottom of a router. Look for something that looks like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. You may need a paper clip to push the reset button.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Just don't forget that this will totally reset your Arris TG4482A router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Arris TG4482A

Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can find all of the information that you need in our TG4482A Login Guide.

Change Your Password

You need to change your router's default password after you log in for the first time. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Arris TG4482A Guides

If you want additional help with your Arris TG4482A be sure to check out some of our other guides.

This is the reset router guide for the Arris TG4482A TG4482PC2_5.8p10s3_PROD_sey Xfinity. We also have the following guides for the same router: