How to change the IP Address on a Axesstel MV400 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Axesstel MV400 router.

Other Axesstel MV400 Guides

This is the ip address guide for the Axesstel MV400. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Axesstel MV400

To get started configuring the Axesstel MV400 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Axesstel MV400, follow our Axesstel MV400 Login Guide.

Change the LAN IP Address on a Axesstel MV400

If you followed our login guide above then you should see this screen.

router wan setup
This is the wan page from your Axesstel MV400 router.

Once you have finished logging into the Axesstel MV400 router you begin on the Basic Settings page. Click the link on the left side of the page labeled LAN IP Setup.

Configure the LAN section of your Axesstel MV400

router IP address lan home network
This is the lan page from your Axesstel MV400 router.

On this new page, the very first box is titled IP Address. Enter the new address you want to use for your router in this box. Ending this address in a one will make it easier to remember in the future.

No other changes need to be made on this page. Just click the APPLY before you exit to save your changes.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Axesstel MV400 Info

Don't forget about our other Axesstel MV400 info that you might be interested in.

This is the ip address guide for the Axesstel MV400. We also have the following guides for the same router: