How to change the IP Address on a Aztech DSL1015EN-L router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Aztech DSL1015EN-L router.

Other Aztech DSL1015EN-L Guides

This is the ip address guide for the Aztech DSL1015EN-L.We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Aztech DSL1015EN-L

To get started configuring the Aztech DSL1015EN-L LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Aztech DSL1015EN-L, follow our Aztech DSL1015EN-L Login Guide.

Change the LAN IP Address on a Aztech DSL1015EN-L

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Aztech router.

To change your IP Address follow these steps:

Log into the Aztech DSL1015EN-L, this should put you on the Device Status page.

Located at the top of the screen, click the tab labeled Home Network Configuration.

Configure the LAN section of your Aztech DSL1015EN-L

router setup
This is the setup page from your Aztech router.

This should put you on the Settings page of the Local Area Network (LAN) Setup. Click the box labeled IP Address and choose the address of your choice.

We would recommend the address of 192.168.1.1 as a good choice for your Router.

Don't change the Subnet Mask, it needs to remain at 255.255.255.0

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Aztech DSL1015EN-L Info

Don't forget about our other Aztech DSL1015EN-L info that you might be interested in.

This is the ip address guide for the Aztech DSL1015EN-L.We also have the following guides for the same router: