This page shows how to change the LAN IP Address on the Aztech DSL605EU router.
Other Aztech DSL605EU Guides
This is the ip address guide for the Aztech DSL605EU. We also have the following guides for the same router:
- Aztech DSL605EU - Aztech DSL605EU Login Instructions
- Aztech DSL605EU - Aztech DSL605EU User Manual
- Aztech DSL605EU - Aztech DSL605EU Port Forwarding Instructions
- Aztech DSL605EU - How to change the DNS settings on a Aztech DSL605EU router
- Aztech DSL605EU - How to Reset the Aztech DSL605EU
- Aztech DSL605EU - Information About the Aztech DSL605EU Router
- Aztech DSL605EU - Aztech DSL605EU Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Aztech DSL605EU
To get started configuring the Aztech DSL605EU LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Aztech DSL605EU, follow our Aztech DSL605EU Login Guide.
Change the LAN IP Address on a Aztech DSL605EU
If you followed our login guide above then you should see this screen.
After you have logged into the Aztech DSL605EU you should begin on the Basic>Home page. To change your Router IP Address, the address you see when inside your local network, click the choice on the left in blue labeled LAN, this is under the heading of Advanced.
Configure the LAN section of your Aztech DSL605EU
On this new page, labeled LAN Group 1 Configuration, scroll down until you see Use the following Static IP Address. Enter your new address in the box labeled IP Address. One good choice is 192.168.0.1
We suggest that you leave the Netmask at 255.255.255.0
Finally, click Submit.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Aztech DSL605EU Info
Don't forget about our other Aztech DSL605EU info that you might be interested in.
This is the ip address guide for the Aztech DSL605EU. We also have the following guides for the same router:
- Aztech DSL605EU - Aztech DSL605EU Login Instructions
- Aztech DSL605EU - Aztech DSL605EU User Manual
- Aztech DSL605EU - Aztech DSL605EU Port Forwarding Instructions
- Aztech DSL605EU - How to change the DNS settings on a Aztech DSL605EU router
- Aztech DSL605EU - How to Reset the Aztech DSL605EU
- Aztech DSL605EU - Information About the Aztech DSL605EU Router
- Aztech DSL605EU - Aztech DSL605EU Screenshots