This page shows how to change the LAN IP Address on the Baudtec T263R1U router.
Other Baudtec T263R1U Guides
This is the ip address guide for the Baudtec T263R1U. We also have the following guides for the same router:
- Baudtec T263R1U - Baudtec T263R1U Login Instructions
- Baudtec T263R1U - Baudtec T263R1U User Manual
- Baudtec T263R1U - Baudtec T263R1U Port Forwarding Instructions
- Baudtec T263R1U - How to change the DNS settings on a Baudtec T263R1U router
- Baudtec T263R1U - How to Reset the Baudtec T263R1U
- Baudtec T263R1U - Information About the Baudtec T263R1U Router
- Baudtec T263R1U - Baudtec T263R1U Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Baudtec T263R1U
To get started configuring the Baudtec T263R1U LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Baudtec T263R1U, follow our Baudtec T263R1U Login Guide.
Change the LAN IP Address on a Baudtec T263R1U
If you followed our login guide above then you should see this screen.
Once you have logged into the Baudtec T263R1U you see the Status page. Click the Interface Setup tab, located at the top of the page. Next, click the smaller tab under that labeled LAN.
Configure the LAN section of your Baudtec T263R1U
On this new page you are able to change your IP Address, your local address for your network. Click the box labeled IP Address and enter the address you have chosen. We would like to recommend the address of 192.168.1.1 as a very good choice.
Leave the Subnet Mask at 255.255.255.0
Make sure the DHCP Server remains enabled, this allows your router to choose these numbers for you.
Finally, save any changes you have made.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Baudtec T263R1U Info
Don't forget about our other Baudtec T263R1U info that you might be interested in.
This is the ip address guide for the Baudtec T263R1U. We also have the following guides for the same router:
- Baudtec T263R1U - Baudtec T263R1U Login Instructions
- Baudtec T263R1U - Baudtec T263R1U User Manual
- Baudtec T263R1U - Baudtec T263R1U Port Forwarding Instructions
- Baudtec T263R1U - How to change the DNS settings on a Baudtec T263R1U router
- Baudtec T263R1U - How to Reset the Baudtec T263R1U
- Baudtec T263R1U - Information About the Baudtec T263R1U Router
- Baudtec T263R1U - Baudtec T263R1U Screenshots