This page shows how to change the LAN IP Address on the Beetel 110BX1 router.
Other Beetel 110BX1 Guides
This is the ip address guide for the Beetel 110BX1. We also have the following guides for the same router:
- Beetel 110BX1 - Beetel 110BX1 Login Instructions
- Beetel 110BX1 - Beetel 110BX1 Port Forwarding Instructions
- Beetel 110BX1 - How to change the DNS settings on a Beetel 110BX1 router
- Beetel 110BX1 - How to Reset the Beetel 110BX1
- Beetel 110BX1 - Information About the Beetel 110BX1 Router
- Beetel 110BX1 - Beetel 110BX1 Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Beetel 110BX1
To get started configuring the Beetel 110BX1 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Beetel 110BX1, follow our Beetel 110BX1 Login Guide.
Change the LAN IP Address on a Beetel 110BX1
If you followed our login guide above then you should see this screen.
When you have logged into the Beetel 110BX1 you see the Summary page. To change your IP Address, first click the tab labeled Advanced Setup, located on the left of the screen. Then click the choice labeled LAN.
Configure the LAN section of your Beetel 110BX1
Click the box labeled IP Address and type the address of your choice. We recommend the address of 192.168.1.1
Make sure to leave the Subnet Mask at 255.255.255.0, and leave the DHCP Server alone.
Don't forget to save any changes you have made before continuing.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Beetel 110BX1 Info
Don't forget about our other Beetel 110BX1 info that you might be interested in.
This is the ip address guide for the Beetel 110BX1. We also have the following guides for the same router:
- Beetel 110BX1 - Beetel 110BX1 Login Instructions
- Beetel 110BX1 - Beetel 110BX1 Port Forwarding Instructions
- Beetel 110BX1 - How to change the DNS settings on a Beetel 110BX1 router
- Beetel 110BX1 - How to Reset the Beetel 110BX1
- Beetel 110BX1 - Information About the Beetel 110BX1 Router
- Beetel 110BX1 - Beetel 110BX1 Screenshots