Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Billion Bipac 7404VNOX

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows you how to reset the Billion BiPAC-7404VNOX router back to the original factory default settings. Before we start there are two terms that are easily confused, to reset and to reboot. To reboot a router is to cycle the power to it by unplugging the power, waiting about 30 seconds, then plugging the power back in. To reset a router is to take all the settings and return them back to factory defaults.

Warning: Resetting a router can be problematic if you don't understand what changes when the reset is complete. We suggest making a list of settings you know will be changed. We have started that list for you:

  • The router's main username and password are returned to factory defaults.
  • The Internet name, password, and security method are reverted to factory defaults.
  • If you use DSL you need to re-enter the ISP or Internet Service Providers username and password. You'll need to call your ISP for this info.
  • Have you made any other changes to the router? How about port forwards? How about IP addresses?

Other Billion Bipac 7404VNOX Guides

This is the reset router guide for the Billion Bipac 7404VNOX. We also have the following guides for the same router:

Reset the Billion Bipac 7404VNOX

The first step in any reset is to know where the reset button is located. Turn your router around and look at the back panel. The reset button is a small recessed button labeled reset. We have circled it's location for you in the image below.

router reset factory settings
This is the reset page from your Billion Bipac 7404VNOX router.

Take the tip of a sharp pencil or pen to press and hold down the reset button for about 10 seconds. Any less and you may only reboot the device instead or resetting it. This is done to avoid accidental resets.

Please don't forget that this WILL erase every setting you have changed on this device. We recommend trying other troubleshooting methods before you resort to resetting the router.

Login to the Billion Bipac 7404VNOX

After the reset is complete you need to login to the device using the correct default IP address, username, and password. We have already found this information for you and included it in our Billion BiPAC-7404VNOX Login Guide.

Change Your Password

The next step is to change the default password. The default password is extremely easy to guess by design. This does not make a strong password. If you follow the ideas and tips put forth in our Choosing a Strong Password guide you will create a strong buy memorable password.

Tip: It's extremely important that you don't lose this password. If you are resetting a home router it's okay to write this password down on a sticky note and attach it to the bottom of the router.

Setup WiFi on the Billion BiPAC-7404VNOX

The last step is to check on the WiFi settings for the Billion BiPAC-7404VNOX router. You need to check on the SSID, password, and security method. For the strongest home encryption available right now use WPA2 with a strong password. For step-by-step instructions check out our How to Setup WiFi on the Billion BiPAC-7404VNOX guide.

Billion Bipac 7404VNOX Help

Be sure to check out our other Billion Bipac 7404VNOX info that you might be interested in.

This is the reset router guide for the Billion Bipac 7404VNOX. We also have the following guides for the same router: